Custom Anti-static ESD Tray
If the standard sizes do not meet your application, custom options are available. At our design department, we will design a custom tray to meet your requirements. Our raw material suppliers are the best in the industry and regularly run Static Dissapative materials. Specify the surface conductivity and we will manufacture trays to meet requirement whether material is ESD, Static Disapative, Anti-Static, or Conductive.
Facility is ISO 9001 Certified with traceability on material and parts including time and date stamps. The fitness of materials ranges from 007" to .080" with a range of anti-static or conductive materials available. Rolls are used for higher volume applications.
Right-Fit: Anti-Static material is in stock and is being run on any of the 250 molds. No mold cost and low minimum of 25 trays.
Heavy-Duty Plastic Containers: Conductive containers are black because the material contains carbon black. The carbon black allows containers to conduct, and therefore if grounded, they will not create an ESD moment. The conductivity of the containers is a permanent characteristic of the high density polyethylene material used to manufacture the containers. There is, however, a tendency for minute particles of the carbon black to slough. This trait may make the containers unacceptable in certain clean rooms. To ensure that the containers are conductive and meet the specification MIL-B81705B, we test the surface resistivity to make sure that it is 105 or less ohms per square inch.
TY-Series Anti-Static Trays: Trays are made from thin gauge PVC material for shipping small electronic parts. It is ideal electronic product packaging. Dozens of pocket configurations are available including 200, 150, 100, 75, 50, and 35 pocket trays. Overall size for all tray configurations is 8.75" X 11.5". Material: PVC Clear(.020" starting thickness) Rating: Anti-static to EIA-541.
Heavy-Duty Series Storage and Inspection Trays: Anti-static trays are generally blue containers. A charge of 5000 volts is fully decayed in less than 2 seconds. This material requires a relative humidity of 15% higher . The advantage of this material is that it does not slough conductive particles and is therefore usable in clean room situations. Containers meet the minimum specifications per MIL-B-81705B. The base material, high density polyethylene, has high impact strength. To ensure that the containers are anti-static, we test the surface resistance. It must be less than 1012 ohms per square inch.
Foam-AS Series Trays: Trays are manufactured from Anti-Static Polyurethane and Polyethylene foam. Both materials are stock. Die cut pockets are mounted to flat sheet of anti-static polyethylene. Conductive materials includs crosslink polyethylene foam available upon special order. Trays are custom with minimal tooling required. Usually 1 steel rule die is needed. Woffer any size or pocket configuration.
Static Safe Corrugated Boxes: Heavy duty conductive coated corrugated for plant handling, and storage of printed circuit boards and related products.
100 of pocket sizes are made for varying size PCB or electronic parts packaging. This is an inexpensive and reusable option. Static safe shipping boxes with dividers are also noted in this area.
XiMan Industrial
Address:Bldg E,West industrial park,Shajing town,Baoan District,Shenzhen,China
Phone/Whatsapp/Webchat: 86-13600440248
Tel:86-755-81497634 Fax:86-755-81495093
Email: charlotte@szblisterpackaging.com
